Home | K.C. Trading | Insulated Containers | Pest/Fly Control | Salt-Removers | Coatings | Containerized Kitchens
 
Blue River Coatings CRC100-H is a two-component inorganic corrosion resistant coating designed for Original Equipment Manufacturers (OEM) to protect metal substrates from corrosion and abrasion. If gouged or damaged, the coating will not experience creepage and is repairable. The product is designed to coat surfaces that require a hard, abrasive, and chemical resistant coating that can withstand temperatures of 1,800 F. CRC100-H offers excellent durability and corrosion protection as well as being a low VOC and EPA compliant coating.
Effective Corrosion Management for Blue River Coatings
Manufacturers Of Environmentally Safe Coatings For Use In Military And Commercial Applications Blue River Coatinsg has successfully manufactured and developed high performance water-base coatings for over two decades. Time Tested Quality is what our products are all about. Blue River Coatings ENVIRO-KOTE is a two-component clear coat treatment system designed for Original Equipment Manufactures (OEM) to protect the substrate over which it is applied from oxidation and abrasion. ENVIRO-KOTE, when applied properly, will not yelllow, chip, crack or peel. Blue River Coatings ENVIRO-RINSE is a rinse aid designed to accelerate and reduce the time required for complete curing of Enviro-Kote or Enviro-Shield. CRC 100-H Blue River Coatings CRC100-H is a two-component inorganic corrosion resistant coating designed for Original Equipment Manufacturers (OEM) to protect metal substrates from corrosion and abrasion.

CRC 100-H

Blue River Coatings CRC100-H is a two-component inorganic corrosion resistant coating designed for Original Equipment Manufacturers (OEM) to protect metal substrates from corrosion and abrasion. If gouged or damaged, the coating will not experience creepage and is repairable. The product is designed to coat surfaces that require a hard, abrasive, and chemical resistant coating that can withstand temperatures of 1,800 °F. CRC100-H offers excellent durability and corrosion protection as well as being a low VOC and EPA compliant coating.

CHARACTERISTICS
Excellent Hardness
Excellent adhesion to oxidized metal
Excellent Heat Tolerance (1800°F+)
Excellent Acid Resistance
Good impact resistance and flexibility
Available In flat finish only
Non-photochemically reactive
Application by spraying or dipping
Solvent is used for clean-up
Air dry
Product life of 48 hours

USES
Steel
Aluminum

AIR QUALITY DATA
Free of lead and cromates
VOC (Volatile Organic Compounds) 1.1 lb/gal; 132 gm/ltr when catalyzed

PHYSICAL DATA
Liquid, white color
Specific Gravity: >1
Evaporation Rate: Slower than either
VOC: 1.1 lb/gal; 132 gm/ltr
% Solid by weight: 73.5%
% Solid by volume: 68.4%
Weight per gallon: 11.2 lbs.
Flash Point: 47°F CC Part A
Flash Point: 150°F CC Part B

Blue river Coatings CRC 100-H is considered non-hazardous by EPA definitions and does not contain lead or chromates. The solid and semi-solid sludge produced in spraying and clean up can be dried and sent to a "Class B" landfill. Please follow local and state regulations in the proper use and disposal of this product.

Purchase Blue River Coatings Product CRC 100-H

Please select a product to continue...
 
K.C. Trading Ltd., 3665 Jefferson-Davis Hwy, Suite 103, Stafford, VA 22554-7748 - Phone: (540) 720-8400 - Email: kctrading@aol.com - © 2003-2005, K.C. Trading Ltd.