Blue River Coatings ENVIRO-RINSE is a rinse aid designed to accelerate and reduce the time required for complete curing of Enviro-Kote or Enviro-Shield. ENVIRO-RINSE provides customers with a solution for quick turn around required for on-time deliveries or mass production schedules.
Cures Enviro-Kote or Enviro-Shield application quickly
Application by spraying, dipping, wiping, or brushing
Little to no irritating odor
Water solvent is used for clean-up
Shelf life of one year
No special safely equipment required
On any substrate coated with Enviro-Kote or Enviro-Shield
AIR QUALITY DATA
Free of lead and cromates
VOC (Volatile Organic Compounds) 0.0 lb/gal; 0.0 gm/ltr when catalyzed
Specific Gravity: 1.0
Evaporation Rate: Slower than either
VOC: 0.0 lb/gal; 0 gm/ltr
% Solid by weight: <1%
% Solid by volume: <1%
Weight per gallon: 8.8 lbs.
Flash Point: 212°F CC
Enviro-Rinse is a ready to use rinse aid and can only be used in conjunction with Enviro-Kote and Enviro-Shield. Application is by spraying, dipping, or wiping. Any substrate that is coated with Envio-Kote or Enviro-Shield may demonstrate a tacky/stick feeling when touched during curing for a period of time.
Use lacquer thinner or MEK for cleanup. Insure that proper protective clothing and equipment is used during application and cleanup.
Blue river Coatings EVIRO-RINSE is considered non-hazardous by EPA definitions and does not contain lead or chromates. The solid and semi-solid sludge produced in spraying and clean up can be dried and sent to a "Class B" landfill. Please follow local and state regulations in the proper use and disposal of this product.